融合可修性度量和双线学习的反导预案修正

对反导预案应用中基于预案推理的预案修正技术进行了研究,提出了一种新的反导预案修正方法。首先,在定义预案属性否决权和修正裕度的基础上,设计了一种考虑预案可修性的相似度计算方法;然后,以其为预案检索和修正规则学习的导向,融合离线预案库学习和在线实时学习策略,给出了预案修正规则的双线学习方法;建立了融合预案可修性度量和双线学习的反导预案修正模型,并对规则的归纳学习策略进行了研究;最后,进行了实例验证,结果证明了新修正方法的可行性和有效性。     

Formation of adiabatic shearing band for high-strength Ti-5553 alloy: A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band (ASB) at low compression strain, while bimodal alloy is considerably ASB-resistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB. In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary α grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of α lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of α/β nano-multilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.     

双DSP技术在无线分组网络路由控制器中的应用

介绍了双DSP技术在无线分组网络路由控制器中的应用,阐述了双DSP间通信方案的选择及双DSP系统的实现,提出了一种双DSP对多个串行通信控制器(SCC)的设计方案,并给出了具体的硬件、软件设计方法.     

用相位梯度法校正超宽带雷达系统的相位误差

线性调频 (LFM)信号体制的超宽带雷达 (UWBR)系统的相位误差 ,会影响雷达系统脉冲压缩的结果。本文提出的相位梯度 (PG)算法 ,能够有效地估计系统相位误差 ,改善脉冲压缩的性能。     

光纤光栅反射率及相位响应的计算

采用分层介质膜的等效模型 ,计算了均匀光纤光栅及线性啁啾光栅的反射谱、透射谱及反射相位跃变 ,结果与采用耦合模理论计算的结果相吻合 ,表明这是分析光纤光栅的光反射特性的一种有效的新方法 .     

去调频处理中空变相位误差补偿方法

调频连续波具有较长的脉宽和较大的信号带宽,通常采用去调频的处理方式,但是,去调频的处理会引入空变的相位误差。从去调频的处理方式入手,根据发射信号相位误差缓变的特点,提出了依据发射信号相位误差模型补偿空变相位误差的方法,并在理论上对该方法进行了推导。该补偿方法分为两步,从差频信号中去除发射信号相位误差,在残余视频相位误差校正之后,通过与补偿函数相乘去除剩余的相位误差。仿真和实测的实验结果表明,该方法能够克服目标距离的限制,有效地补偿空变相位误差带来的影响,提高脉压水平。提出的误差补偿方法能够很好地平衡系统负载、误差补偿精度和算法开销,具有较强实用性。     

混沌信号处理

描述了混沌特征参量 ,包括Lyapunov指数和分形维 ;讨论了信号相空间重构和Takens嵌入定理 ,以及嵌入维数、时间延迟等参数。还阐述应用神经网络进行混沌信号非线性处理     

Estimating the point availability with right‐censored data

The point availability of a one‐unit system at a specified time is defined as the probability that the component is operating at that time. When both operating time and repair time are subject to random (right) censorship, we propose an asymptotic nonparametric approach for constructing confidence intervals for the point availability of the system. The technique is based on the fact that a product limit estimator converges to a Gaussian process. The method is also extended to finding confidence intervals for the point availability of a complex system using the δ‐Method. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 119–127, 1999     

二元共晶系相变材料热力学模型的研究

推导了二元共晶系的热力学模型,改进了单参数的Margules方程,引入了温度项,利用实验值对方程中的参数进行了回归,结果表明该热力学模型是可行的,从而可以应用该模型计算二元共晶系相变材料的最低共熔点和组成。     

气—固两相自由射流的粒子仿真方法

采用粒子仿真方法直接跟踪颗粒相运动轨迹,采用NND格式求解NS方程,数值模拟了气-固两相自由射流流场.计算结果表明,将粒子仿真与CFD方法相结合是研究气-固两相流动问题的有效途径.颗粒相参数变化将对气体流场产生一定影响.